本文已被:浏览 1173次 下载 1次
投稿时间:2017-04-11 修订日期:2017-04-14
投稿时间:2017-04-11 修订日期:2017-04-14
中文摘要: 针对转炉烟尘成分组成,提出利用电解铜废液浸出烟尘制备硫酸铜和硫酸锌的工艺路线,主要考察了电解铜废液用量、浸出温度、浸出时间对烟尘中铜、锌浸出率的影响;获得的浸出液含砷较高,采用加石灰乳沉砷,经过过滤、洗涤,获得含铜、锌溶液;用ZJ988萃取铜,实现铜和锌分离,反萃液和萃余液用浓缩结晶分别获得硫酸铜和硫酸锌产品。该工艺不仅可利用烟尘中的铜和锌,而且利用电解铜废液中的硫酸,实现铜冶炼厂转炉烟尘和电解铜废酸高效综合利用。
Abstract:the process of preparing copper sulfate and zinc sulfate from the electrolytic copper waste liquor leaching converter dust was proposed directing at the composition of converter dust component in this paper. The effects of the amount of electrolytic copper waste liquor, leaching temperature and leaching time on the leaching rate of copper and zinc were studied; due to the high content of arsenic in the leaching solution, the process of the precipitation of arsenic by adding lime milk was used, and the solution containing copper and zinc was obtained after filtration and washing. Copper and zinc were separated by ZJ988, and the products of copper sulfate and zinc sulfate were obtained by concentrated stripping solution and raffinate and crystallized. The technology can not only utilize the copper and zinc in the converter dust, but also utilize the sulfuric acid in the electrolytic copper waste liquid, which can realize the comprehensive utilization of the converter dust and the electrolytic copper waste acid in the copper smelting plant.
文章编号:20170411002 中图分类号: 文献标志码:
基金项目:
作者 | 单位 | |
陈雄 | 云南铜业股份有限公司 | kmcx16@163.com |
范兴祥* | 昆明冶金高等专科学校 | fanxingxiang@tom.com |
杨坤彬 | 云南铜业股份有限公司 | |
华宏全 | 云南铜业股份有限公司 | |
袁杰 | 云南铜业股份有限公司 | |
李用齐 | 云南铜业股份有限公司 |
引用文本:
陈雄,范兴祥,杨坤彬,华宏全,袁杰,李用齐.铜电解废液浸出转炉烟尘制备硫酸铜联产硫酸锌工艺研究[J].矿冶,2018,27(1):53~56.
陈雄,范兴祥,杨坤彬,华宏全,袁杰,李用齐.铜电解废液浸出转炉烟尘制备硫酸铜联产硫酸锌工艺研究[J].矿冶,2018,27(1):53~56.