本文已被:浏览 3498次 下载 2779次
投稿时间:2017-09-19 修订日期:2017-09-21
投稿时间:2017-09-19 修订日期:2017-09-21
中文摘要: 为提高U形废线路板焚烧冶炼炉作业强度,并防止大量污染物生成、排放,针对炉内焚烧冶炼过程建立数值模型,提出U形废线路板焚烧冶炼炉操作参数优化方案,采用4因素4水平L16(44)正交试验法分析炉内空气预热温度、空气含氧量、过剩空气系数和颗粒粒径对出口烟气含氧浓度、焦炭燃烬率、CO燃烬率和污染物排放的影响程度。研究结果表明:U形废线路板焚烧冶炼炉最优操作参数的特点为高温、低氧、小过剩空气系数和小粒径。
Abstract:In order to increase the smelting intensity of the U-shaped waste circuit boards incineration smelting furnace and prevent the mass of pollutants, the paper built the simulation model according to the smelting process, optimized the operational parameters of the U-shaped waste circuit boards incineration smelting furnace, designed a 4 factors 4 levels L16(44) orthogonal plan, the simulation study is carried out to investigate the effects of the operational parameters(i.e. the preheating temperature, the air oxygen concentration, the excess air ratio and the waste circuit boards particle size) on gas oxygen concentration、C burning rate、CO burning rate and pollutant emissions. The simulation results show that the best features of the U-shaped waste circuit boards incineration smelting furnace are high temperature、low air oxygen concentration、small excess air ratio and small waste circuit boards particle size.
keywords: U-shaped incineration smelting furnace numerical simulation orthogonal experiment parameter optimization
文章编号:20170919001 中图分类号: 文献标志码:
基金项目:浙江省2009年重大科技专项和优先主题项目:废线路板超高温资源化处置系统研究与产业化(2009C03007-5)
引用文本:
艾元方,周睿,帕提玛.柯孜尔亚.U形炉操作参数正交试验法优化[J].矿冶,2018,27(4):66~71.
艾元方,周睿,帕提玛.柯孜尔亚.U形炉操作参数正交试验法优化[J].矿冶,2018,27(4):66~71.