###
DOI:
矿冶:2018,27(4):92-96
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
双旋转毂式矫直机的优化设计
莫翰林,孙东明,王立铮,钟晨,漆昌元
(昆明理工大学 机电工程学院,昆明理工大学 机电工程学院,昆明理工大学 机电工程学院,昆明理工大学 机电工程学院,昆明理工大学 机电工程学院)
The Optimization Design of Leveller with Double Rotary Hub
MO Hanlin,SUN Dongming,WANG Lizheng,ZHONG Chen and QI Changyuan
(Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology)
摘要
图/表
参考文献
相似文献
本文已被:浏览 547次   下载 1117
投稿时间:2017-10-04    修订日期:2018-03-27
中文摘要: 目前电解法作为纯镍生产的主流方法被广泛采用,其主要特点为通过导电棒引导电流,最终将电流导向种板。因此在实际生产中由于受到承重、撞击等各种因素的影响,导电棒会产生形变。因为整个电解过程的效率和自动化程度的提高需要使用满足要求直线度的导电棒,所以一个电解周期后必须矫直产生形变的导电棒。本文以国内某镍冶炼厂中规格为Φ36 ×3 ×1350 的电镍导电棒为研究对象,对转毂式斜辊矫直机进行研究,利用优化后的矫直机矫直编为两组的20根电镍导电棒,对矫直后的导电棒进行测量,并分析比较其平直度,从而验证该种矫直机能否完成电镍导电棒的矫直。
Abstract:For the moment, electrolytic method is widely used as the mainstream method of pure nickel production. The main characteristic is to guide the current through the conductive rod, and finally the current is guided to the plate. Therefore, in actual production, due to the influence of bearing, impact and other factors, the conductive rod will undergo deformation. Because the efficiency of the whole electrolysis process and the improvement of the degree of automation need to use the conductive rod that meet the required straightness, these conductive rods must be straightened after an electrolytic cycle. In this text, we study rotary bevel type roller straightening machine by choose conductivity rod with a size of 36×3×1350 in a domestic nickel smelter for the study. By using the optimized straightener to straighten two groups of 20 electric nickel conductive rods, measuring these conductive rods and analyzing their flatness, and verifying whether the straightener can complete the straightening of the electric nickel conductive rod.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
莫翰林,孙东明,王立铮,钟晨,漆昌元.双旋转毂式矫直机的优化设计[J].矿冶,2018,27(4):92~96.

为了给您提供更优质的网页浏览体验,请使用 Firefox 、Chrome、IE10、IE11、360极速模式、搜狗极速模式、QQ极速模式等浏览器,其他浏览器不建议使用

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
010-63299751

杂志信息

期刊简介

相关下载

联系我们

电话:010-63299751

传真:010-63299754

QQ:XXXXXXX

Email:kuangye@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼905 北京矿冶研究总院《矿冶》编辑部

关注微信公众号