###
DOI:
矿冶:2019,28(3):-
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
塔吉克斯坦某金矿选冶设计及生产实践
刘阅兵
(北京矿冶科技集团有限公司)
Design and Production Practice of dressing and metallurgy of a Gold Mine in Tajikistan
LIU Yuebing
(BGRIMM Technology Group)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2553次   下载 1437
投稿时间:2018-05-16    修订日期:2018-05-29
中文摘要: 通过对矿石性质的研究、选冶试验分析,并结合国内外类似矿山生产实践经验,对塔吉克斯坦某金矿设计了合理的选冶工艺流程。设计的选别流程为三段一闭路破碎、两段闭路磨矿、重选 浮选的流程;设计的冶金工艺流程为氰化浸出、洗涤锌粉置换、精炼等。所采用的的工艺流程设计合理,设备选型正确,工业实施后选冶指标均达到设计水平。
中文关键词: 金矿  选别工艺  冶金工艺  设计
Abstract:Through the study of ore properties, analysis of dressing and metallurgy test, and the experience of similar mine production practice at home and abroad, a reasonable dressing and metallurgical process was designed for a gold mine in Tajikistan. The design process of ore dressing included three stage crushing with a closed one, two stage closed grinding, gravity separation and flotation; and the designed metallurgical process included cyanide leaching, washing zinc dust replacement, refining and so on. The process flow is rational and sizing of equipment appropriate, processing and metallurgical indicators after industrial application is up to engineering design standard.
文章编号:20180516001     中图分类号:    文献标志码:
基金项目:
Author NameAffiliationE-mail
LIU Yuebing BGRIMM Technology Group liuruobing27@163.com 
引用文本:
刘阅兵.塔吉克斯坦某金矿选冶设计及生产实践[J].矿冶,2019,28(3):.

为了给您提供更优质的网页浏览体验,请使用 Firefox 、Chrome、IE10、IE11、360极速模式、搜狗极速模式、QQ极速模式等浏览器,其他浏览器不建议使用

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
010-63299751

杂志信息

期刊简介

相关下载

联系我们

电话:010-63299751

传真:010-63299754

Email:kuangye@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼905 北京矿冶研究总院《矿冶》编辑部

关注微信公众号