###
DOI:
矿冶:2022,31(5):-
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
多宝山铜矿二段磨矿分级系统对比研究
刘克爽1, 周游2, 刘伟然3
(1.黑龙江多宝山铜业股份有限公司;2.紫金矿业集团股份有限公司;3.矿冶科技集团有限公司)
Comparative Study On Grinding Classification System Of Duobaoshan Copper Mine
liukeshuang1, zhouyou2, liuweiran3
(1.Heilongjiang Duobaoshan Copper Co., LTD.;2.Zijin Mining Group Co., LTD.;3.BGRIMM Technology Group)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1275次   下载 848
投稿时间:2021-12-14    修订日期:2021-12-15
中文摘要: 黑龙江多宝山铜矿石为典型的低品位硫化铜矿石,原矿Cu品位为0.41%,目的矿物与脉石矿物嵌布粒度细,精矿指标受磨矿作业效率的影响较大。多宝山铜矿选厂的二期工程分为两个系列,现有选矿工艺流程为闭路磨矿分级作业,能基本满足生产要求,但存在水力旋流器循环负荷过大、立磨机过磨现象严重的问题。对现有磨矿分级工艺进行优化研究,改为半开路磨矿作业后,现存生产问题得到有效改善,磨矿产品铜品位提高到了20.05%,回收率提高到了90.18%,同时能有效降低生产能耗。
中文关键词: 铜矿 磨矿 分级 优化
Abstract:Duobaoshan copper ore in Heilongjiang province is a typical low-grade copper sulfide ore with Cu grade of 0.41%. The target mineral and gangue mineral disseminated grain size is fine, and the concentrate index is greatly affected by grinding efficiency. The second phase project of Duobaoshan Copper Concentrator is divided into two series. The existing beneficiation process is closed-circuit grinding and classification operation, which can basically meet the production requirements, but there are problems such as excessive cyclic load of hydrocyclone and serious over-grinding of vertical mill. After the optimization of the existing grinding and classification process, the existing production problems are effectively improved, the copper grade of grinding products is increased to 20.05%, the recovery rate is increased to 90.18%, and the production energy consumption can be effectively reduced.
文章编号:20211214001     中图分类号:    文献标志码:
基金项目:
引用文本:
刘克爽,周游,刘伟然.多宝山铜矿二段磨矿分级系统对比研究[J].矿冶,2022,31(5):.

为了给您提供更优质的网页浏览体验,请使用 Firefox 、Chrome、IE10、IE11、360极速模式、搜狗极速模式、QQ极速模式等浏览器,其他浏览器不建议使用

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
010-63299751

杂志信息

期刊简介

相关下载

联系我们

电话:010-63299751

传真:010-63299754

Email:kuangye@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼905 北京矿冶研究总院《矿冶》编辑部

关注微信公众号