|
| Preparation of Crystal Bar Zirconium by the Iodide Method |
|
Received:December 03, 2013
Revised:May 08, 2014
Accepted:December 11, 2013
Published Online:September 09, 2014
|
| View Full Text View/Add Comment Download reader |
| DOI： |
| KeyWord:Iodide Method; Zirconium Crystal Bar; purification method |
| Author | Institution |
| Li Zhongqi |
Rare Metals |
| Yin Yanxi |
Rare Metals Metallurgy Materials Research Institute,General Research Institute for Nonferrous Metals;China |
| Tian Lisen |
Rare Metals Metallurgy Materials Research Institute,General Research Institute for Nonferrous Metals;China |
| Hu Zhifang |
Rare Metals Metallurgy Materials Research Institute,General Research Institute for Nonferrous Metals;China |
| Jiang Honglin |
Rare Metals Metallurgy Materials Research Institute,General Research Institute for Nonferrous Metals;China |
| Wang Lijun |
Rare Metals Metallurgy Materials Research Institute,General Research Institute for Nonferrous Metals;China |
|
| Hits: 3133 |
| Download times: 1 |
| Abstract: |
| Iodide process is one of the most effective methods for purification of zirconium metal. The crystal bar zirconium made by the iodide process has the advantage of the higher purity, lower content of the gas impurities and better processing performance etc. The 99.9% crystal bar zirconium can be obtained by the iodide process using the zirconium sponge as the raw materials. In this paper, the principle of iodide method was sketched; the iodide equipment and the progress of the influencing factors were summarized. |
| Close |
|
|
|