|
| Experimental study on compression breakage characteristic of solid waste incineration slag |
|
Received:January 04, 2017
Revised:January 16, 2017
Accepted:January 09, 2017
Published Online:October 18, 2017
|
| View Full Text View/Add Comment Download reader |
| DOI： |
| KeyWord:solid waste incineration slag; particle breakage;compression test ; breakage rate |
| Author | Institution |
| Li Yue |
Shanghai University |
| Sun De'an |
Shanghai University |
|
| Hits: 1945 |
| Download times: 1 |
| Abstract: |
| The slag produced in a solid waste incineration plant in Shanghai was subjected to compression tests at different maximum vertical pressures (200-3200 kPa). All samples were tested for particle size distribution before and after the test. It is shown that when the applied maximum vertical pressures is less than the yield?stress of slag, the grading curves were little affected by applied pressures. When the applied maximum vertical pressure is large than the yield?stress of slag, the slag particle are obviously broken and the grading curves were obviously affected by applied pressures. In addition，broken particle size of the slag is mainly concentrated in the maximum particle size group under the compression test. Finally, the breakage of the slag is also analyzed using Hardin model. |
| Close |