Volume 34,Issue 6,2025 Table of Contents

   
Other Issues:  
  

Mine Geology, Mining and Safety

Construction and application of the mining value evaluation system for residual ore resources
  2025,34(6):894-899 [Abstract]  [View PDF(67.06 K)]
  
Rheological properties of composite aggregate paste backfill slurry
  2025,34(6):900-905 [Abstract]  [View PDF(54.49 K)]
  
Control and repair technology for floor heave in roadways within deep high-stress fault fracture zones
  2025,34(6):906-913 [Abstract]  [View PDF(53.57 K)]
  
Multi-layer DEM-based metallogenic characteristics analysis and optimization algorithm for prospecting targets in polymetallic deposits
  2025,34(6):914-919 [Abstract]  [View PDF(60.97 K)]
  
A method for landslide susceptibility zoning in mountainous areas based on change rate of time-of-flight depth images
  2025,34(6):920-925 [Abstract]  [View PDF(73.28 K)]
  
Experimental study on displacement monitoring of geotube dam foundation based on shape acceleration array
  2025,34(6):926-933 [Abstract]  [View PDF(60.27 K)]
  
Optimal dispatch of integrated energy systems considering coalbed methane gas turbines for peak regulation
  2025,34(6):1009-1015 [Abstract]  [View PDF(80.55 K)]
  
Study on total carbon emissions and peak carbon pathways in Xinjiang uygur autonomous region based on scenario analysis
  2025,34(6):1016-1024 [Abstract]  [View PDF(89.40 K)]
  

metallurgy & material

Mechanism, challenges, and industrial practice of chain catalytic oxidation for iron and manganese removal in hydrometallurgy
  2025,34(6):961-967 [Abstract]  [View PDF(54.15 K)]
  
Removal of calcium and magnesium impurities from molten salt chlorination slag by high-temperature phase transformation and recovery of sodium chloride
  2025,34(6):968-975 [Abstract]  [View PDF(61.85 K)]
  
Study on the leaching behavior of zinc and copper during the oxygen pressure leaching process of copper-containing zinc sulfide concentrate
  2025,34(6):976-982 [Abstract]  [View PDF(46.73 K)]
  
Adsorption characteristics and mechanism of titanium-based ion sieves for lithium/aluminum separation in alkaline leachate of clay-type lithium ore
  2025,34(6):983-991 [Abstract]  [View PDF(71.68 K)]
  
Enhanced electrochemical performance of LiNi0.5Mn1.5O4 cathode materials via Ce-Cr co-doping
  2025,34(6):992-997 [Abstract]  [View PDF(41.38 K)]
  
Preparation of indium oxide powder by indium nitrate-ammonia gas method
  2025,34(6):998-1002 [Abstract]  [View PDF(46.64 K)]
  
Microstructure and property evolution of coarse-grained heat-affected zone in 960 MPa high-strength steel with low yield ratio
  2025,34(6):1003-1008 [Abstract]  [View PDF(44.54 K)]
  

Mineral Prcocessing and Process Mineralogy

Recovery of copper and zinc by bulk flotation and subsequent separation from an iron tailings in Western Yunnan
  2025,34(6):934-943 [Abstract]  [View PDF(70.28 K)]
  
Evaluation of recovery potential and techno-economic viability of lithium-bearing pegmatite tailing from South-central Africa
  2025,34(6):944-952 [Abstract]  [View PDF(87.39 K)]
  
Process mineralogical research of beryllium in Shizhuyuan tungsten polymetallic ore
  2025,34(6):953-960 [Abstract]  [View PDF(89.87 K)]
  

Review of Mining and Metallurgy

Research progress and prospects in the flotation separation of mica and quartz
  2025,34(6):835-845 [Abstract]  [View PDF(104.86 K)]
  
Research status and application of gold extraction by ion exchange resin
  2025,34(6):846-852 [Abstract]  [View PDF(83.65 K)]
  
Analysis of the current situation and future prospects of tailings resource utilization in China
  2025,34(6):853-863 [Abstract]  [View PDF(164.27 K)]
  
Research progress and prospects in red mud dealkalization technology
  2025,34(6):864-872 [Abstract]  [View PDF(106.96 K)]
  
Research progress on separation technology of manganese and iron in manganese ores
  2025,34(6):873-882 [Abstract]  [View PDF(110.42 K)]
  
Ceramic-based abradable sealing coating material system research status and outlook
  2025,34(6):883-893 [Abstract]  [View PDF(103.85 K)]